Mättnad magnetisk induktionsintensitet Bs: Dess storlek beror på materialets sammansättning, och dess motsvarande fysiska tillstånd är att magnetiseringsvektorerna inuti materialet är snyggt arrangerade.
Restmagnetisk induktionsintensitet Br: är den karakteristiska parametern på hysteresloopen, B-värdet när H återgår till 0.
Squareness ratio: Br∕Bs
Koercitivkraft Hc: Det är en storhet som indikerar svårigheten att magnetisera ett material och beror på materialets sammansättning och defekter (föroreningar, spänningar etc.).
Magnetic permeability μ: is the ratio of B to H corresponding to any point on the hysteresis loop, and is closely related to the working state of the device.
Initial permeability μi, maximum permeability μm, differential permeability μd, amplitude permeability μa, effective permeability μe, and pulse permeability μp.
Curietemperatur Tc: Magnetiseringen av ferromagnetiska ämnen minskar när temperaturen ökar. När en viss temperatur uppnås försvinner den spontana magnetiseringen och blir paramagnetisk. Den kritiska temperaturen är Curie-temperaturen. Den bestämmer den övre gränstemperaturen vid vilken magnetiska enheter fungerar.
Loss P: hysteresis loss Ph and eddy current loss Pe P = Ph plus Pe = af plus bf2 plus c Pe ∝ f2 t2 / , ρ decreases,
The method to reduce the hysteresis loss Ph is to reduce the coercive force Hc; the method to reduce the eddy current loss Pe is to reduce the thickness t of the magnetic material and increase the resistivity ρ of the material. The loss of the core in free still air is related to the temperature rise of the core as:
Total effektförlust (mW) / Yta (cm2)






